Some links on our site may earn us a commission at no extra cost to you. Learn more.
Published October 28, 2026.
The best engine block heaters depend on how your engine is built, not just how cold it gets. Kat’s 90-watt dipstick heater is the cheapest and simplest install. Kat’s 200-watt magnetic heater needs no tools. John Deere’s AR87167 kit is built for its own compact tractors and Gators. The 750-watt Zerostart 3100112 freeze plug heater puts out the most heat of the four.
I’ve made enough early starts on long drives through the upper Midwest and into Canada. I know what a dash full of warning lights looks like at ten below. An engine that sits outside all night in that kind of cold doesn’t turn over slowly. It just doesn’t turn over, and the battery usually takes the blame for what the oil is actually doing. That’s the whole case for plugging something in before bed instead of finding out at six in the morning.
At a Glance: Best Engine Block Heaters
Here are all four picks, with prices as of October 29, 2026, and install type, before the specs and the per-product detail.
- Lowest price: Kat’s 90W Dipstick Heater, $24.99. Replaces the existing dipstick, submerges in the oil, no draining or drilling.
- No draining or drilling: Kat’s 120V 200W Magnetic Heater, $54.99. Clamps to a flat metal surface on the block, oil pan, or battery case with a magnet.
- Best factory fit for compact tractors: John Deere AR87167 Coolant Heater Kit, $105.46. 400-watt OEM kit built for compact utility tractors and Gator/XUV utility vehicles.
- Highest output: Zerostart 3100112 Freeze Plug Heater, $170.99. 750 watts, replaces a 1-1/2 inch cup-type frost plug, listed for Ford 3000 to 9000 series tractors from 1971 on.
Engine Block Heaters Compared: Price, Wattage, and Install Type
Prices and specs below come from each retailer’s or maker’s listing as of October 29, 2026.
| Spec | Kat’s Dipstick Heater | Kat’s Magnetic Heater | John Deere AR87167 | Zerostart 3100112 |
|---|---|---|---|---|
| Price | $24.99 | $54.99 | $105.46 | $170.99 |
| Wattage / voltage | 90W, 120V | 200W, 120V | 400W, 120V | 750W (voltage not published) |
| Install type | Replaces dipstick, submerges in oil | Magnetic, no tools | Bolts into factory coolant port with adapter | Replaces a frost (freeze) plug |
| Cord length | Not specified | Not specified | Not specified | 13 in. |
| Warranty | 1-year limited | 1-year limited | Not specified (OEM part) | Not listed by retailer |
How Does a Block Heater Help an Engine Start in the Cold?
Engine oil thickens as the temperature drops. Thicker oil circulates more slowly through the engine in the first seconds after startup, which is when most cold-start wear happens. A block heater keeps the coolant, the oil, or both warmer overnight. That way the oil is already flowing more easily the moment the key turns, instead of grinding through a few minutes of thick, sluggish lubrication on its own. The EPA notes that modern vehicles don’t need to idle to warm up before driving — a block heater does that warming job before you even start the engine, instead of after.
How Long Should You Plug In an Engine Block Heater?
Verendrye Electric Cooperative, a rural electric utility, says most modern block heaters need only two to three hours, even in subzero cold, and a little longer around 20 below. A timer is the simplest fix if you don’t want a cord live all night. Set it to switch on two to three hours before you plan to leave, rather than running a heater for a full eight or ten hours in the garage or driveway.
Kat’s 90W Dipstick Heater — Lowest Price of These Four
Kat’s dipstick heater replaces your vehicle or equipment’s existing dipstick and submerges in at least 4 inches of oil. Tractor Supply lists it at $24.99 as of October 29, 2026, rated 90 watts on a 120V cord. It’s a straight swap with no drilling, draining, or frost-plug removal, which makes it the simplest of these four to install in an afternoon. Tractor Supply’s Q&A says the heating element shouldn’t be cut or altered, and warns that doing so can void the 1-year limited warranty.
- Pros: Cheapest option here, no tools beyond a dipstick swap, 1-year warranty.
- Cons: Tractor Supply’s customer reviews average 3 out of 5 stars, and a number report the element failing early, so confirm the retailer’s return policy before you buy. Needs at least 4 inches of oil depth to work as intended.
- Best for: A tight budget, or any engine where a frost-plug or magnetic spot isn’t a good option.
Kat’s 200W Magnetic Heater — No Drilling or Draining Needed
This heater clamps to any flat, magnetic metal surface using a built-in magnet — the oil pan, an intake manifold, or a battery case. Tractor Supply lists it at $54.99 as of October 29, 2026, rated 200 watts on a 120V cord. It carries a 1-year limited warranty, the same as the dipstick model. Its own listing doesn’t name specific compatible tractor or truck models. A Q&A answer on the page states it has no fixed model compatibility, so check that your equipment has a suitable flat metal surface before ordering.
- Pros: No draining, drilling, or dipstick swap. 1-year warranty. Works on oil pans, manifolds, and other flat metal surfaces.
- Cons: No published list of compatible equipment — fit isn’t guaranteed the way it is with an OEM kit.
- Best for: Equipment where you’d rather not remove a frost plug or swap a dipstick.
John Deere AR87167 — Best Factory Fit for Compact Utility Tractors
This is John Deere’s own coolant heater kit, rated at 400 watts and built to plug into a 120V outlet. BTI Direct lists it at $105.46 as of October 29, 2026. Deere’s own fitment list covers a long run of compact utility tractors and Gator/XUV utility vehicles, among others, and asks you to select your exact machine to confirm fit. Deere also says it requires the matching engine heater adapter, so check your tractor’s parts diagram or ask a dealer before ordering.
- Pros: Factory-designed fit for Deere compact tractors and utility vehicles, higher wattage than either Kat’s option.
- Cons: Highest price before the Zerostart, and needs the matching engine heater adapter.
- Best for: Owners of a compatible Deere compact tractor, Gator, or XUV who want a factory-matched part.
Zerostart 3100112 — Highest Wattage of These Four
The Zerostart 3100112 replaces a 1-1/2 inch cup-type frost plug and runs at 750 watts, well above the other three heaters here. Quality Farm Supply lists it at $170.99 as of October 29, 2026, with a 13-inch cord, for Ford 3000 through 9000 series tractors from 1971 on. That extra wattage suits bigger engines, where a lower-wattage dipstick or magnetic heater may struggle to warm the oil and coolant overnight. Installing it means removing an existing frost plug, which is a bigger job than a dipstick swap or a magnetic clamp-on, and usually means draining some coolant first.
- Pros: Highest wattage here, suited to larger engines and genuinely cold climates.
- Cons: Most expensive pick, and installation is more involved than any of the other three.
- Best for: Owners of a listed Ford tractor in a cold climate who want the most heat output of these four.
Which Type of Engine Block Heater Fits Your Equipment?
Check for a frost (freeze) plug on the side of your engine block first — most factory block heater kits, including the Zerostart here, are built to replace one. If you can’t find one, or don’t want to drain coolant to install it, a dipstick heater is the next simplest option. Just make sure your dipstick tube gives it enough oil depth to submerge in. A magnetic heater is the fallback when neither of those fits. It needs only a flat, magnetic metal surface, though it has to sit directly against that surface to transfer heat well. If you own a compatible John Deere tractor or utility vehicle, the OEM kit is worth checking first, since it’s built for your machine’s exact wiring and mounting points.
Cold Weather Car Care Beyond Engine Block Heaters
For keeping a battery charged alongside a block heater over a cold storage season, see our car battery maintainer comparison. If a battery’s already dead rather than just slow to turn over, our NOCO Boost Plus GB40 review covers the jump starter for that. Cold weather also drops tire pressure fast enough to trigger a warning light, which our tire pressure monitoring guide covers in more detail.
Frequently Asked Questions About Engine Block Heaters
Do block heaters use a lot of electricity?
Not much. A 400 to 750-watt heater draws about half or less of what a typical 1,500-watt space heater does, so a few hours on a timer is a small cost against a dead battery or a tow truck call on a cold morning.
Can I leave a block heater plugged in all night?
You can, but it isn’t necessary and it isn’t free. Verendrye Electric Cooperative says two to three hours is usually enough, even below zero, so a timer set to switch on a few hours before your planned start time does the same job for less electricity and less wear on the cord and outlet.
Will a block heater work on a gas engine, or only diesel?
Block heaters work on gas and diesel engines alike, since cold oil and slow starts aren’t a diesel-only problem. The two Kat’s heaters aren’t tied to a fuel type, while the Zerostart and Deere kits are sold for specific tractor and utility-vehicle engines. Diesel owners tend to feel the cold first, since diesel fuel thickens as it gets colder.
Do I need an extension cord rated for outdoor use?
Yes. Manitoba Hydro says to use only extension cords rated for outdoor use and never exceed their wattage rating. Check the cord before each use, and replace it, rather than taping it, if the insulation is worn.
Best Engine Block Heaters: How to Choose the Right One
Pick the Zerostart 3100112 if it’s listed for your tractor and you want the most heat output of these four. Choose Kat’s dipstick heater if you want the simplest, cheapest install and your dipstick tube has the oil depth for it. Go with Kat’s magnetic heater if you’d rather avoid draining coolant or swapping a dipstick at all. And check the John Deere AR87167 first if you already own a compatible compact tractor or Gator. A factory-matched part beats guessing at fitment with an aftermarket one.
Prices are approximate, current as of publication, and change frequently — confirm the latest price with the retailer before buying.

